BPC PowerMaster Bedienungshandbuch PDF herunterladen (Seite 15)

LEGACY CAB-2 Remote Controller Commands

Train Brake Slider

Adjust to set the limit for the

maximum voltage from the

output.

(LEGACY and TMCC mode)

Emergency Halt Button

Press to reset all LEGACY

PowerMaster outputs and

all Command Controlled

equipment.

Velocity Throttle

Rotate clockwise to increase

output voltage. Rotate

counter-clockwise to

decrease output voltage.

Set Button

Used to set ENG and TR

addresses and to set maximum

output in CMD mode.

Warning Sound Controller

Push up to trigger the bell on

equipped locomotives. Pull down

to trigger the whistle on equipped

locomotives.

Boost

Rotate up to increase the output

voltage while control is activated.

Voltage returns to initial level when

control is released.

Front & Rear Coupler Buttons

Press to re the front and

rear ElectroCouplers on

Conventional locomotives.

AUX-1/Thru Button

Press to view the Control

Panel while operating.

0 or R buttons

Press to reset the output

voltage to zero and reset an

overload shutdown.

Direction

Press to momentarily interrupt

the output voltage to activate

the reversing unit in conventional

locomotives.

Brake

Rotate down to decrease the

output voltage while control is

activated. Voltage returns to initial

level when control is released.

Speed Step Settings

The L, M and H buttons have different meanings depending

on the previously set Control Mode assigned to the output.

CAB1 Control Mode Outputs

L 32 step mode output

M 100 step mode output

H 200 step mode output

TMCC Control Mode Outputs

L 32 step mode with LOW momentum

M 32 step mode with MEDIUM momentum.

H 32 step mode with HIGH momentum.

LEGACY Control Mode Outputs

L 200 step mode with LOW momentum, level 1

M 200 step mode with MEDIUM momentum, level 4 (Press

and hold, then use the Velocity Throttle to select levels

1 through 8.)

H 200 step mode with HIGH momentum, level 8

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

BPC PowerMaster Bedienungshandbuch Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern BPC PowerMaster