BPC PowerMaster Bedienungshandbuch PDF herunterladen (Seite 16)

CAB-1 and CAB-1L Remote Controller commands

Fires the rear ElectroCoupler on select

Conventional locomotives.

Fires the front ElectroCoupler on select

Conventional locomotives.

The AUX1, 0 sequence sets the output voltage

to zero and resets an overload shutdown.

Increases the output voltage with a clockwise

rotation. Decreases the output voltage with a

counter-clockwise rotation.

Triggers the whistle on equipped locomotives.

Triggers the bell on equipped locomotives.

Momentarily interrupts the output voltage to

activate the reversing unit in the locomotive.

Increases the output voltage while button is

pressed. Voltage returns to initial level when

button is released.

Reduces the output voltage while button is pressed.

Voltage returns to initial level when button is released.

Resets all LEGACY PowerMaster outputs to zero and

resets all Command Controlled equipment.

Used to set ENG or TR addresses and to

set maximum output in CMD mode

SET LMH

Speed Step Settings

L Sets the output to 32 speed

step mode

M Sets the output to 100 speed

step mode

H Sets the output to 200 speed

step mode

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

BPC PowerMaster Bedienungshandbuch Seite 16