BPC PowerMaster Bedienungshandbuch PDF herunterladen (Seite 4)

PROG/RUN

CMD/CONV

180

135

LEGACY PowerMaster Features

Program/Run

switch

Command/Conventional

switch

Transformer jack

Red indicator

Green indicator

Power Selection Switch

Slide the switch to the 135W position to set the electronic current limit to 135W when using

a 135W PowerHouse transformer. Leave the switch in the 180W position to set the electronic

current limit to 180W when using a 180W PowerHouse transformer.

A and U Power Output Terminals

Connect the A terminal to the middle rail of the track. Connect the U terminal to the outside

rail of the track.

Transformer Jack

Power input connector from transformer.

Green Indicator - Power on indicator

Light will be on during normal operations. Light will flicker to indicate weak or absent

command signal. Light will flash when setting the maximum output in CMD mode.

Red Indicator - Comm/Overload Indicator

Light will flash when receiving commands from the CAB controller or when the power limit

has been exceeded. The light will come on if the output has been shut down due to an

overload.

Program/Run Switch

Slide the switch to the PROG position to assign a unique TR or ENG ID#. Leave the switch in

the RUN position for normal operation.

Command/Conventional Switch

Slide the switch to the CMD position to use the LEGACY PowerMaster as an ON/OFF switch

to run command equipped locomotives. Leave the switch in the CONV position to run

conventional locomotives.

A U

Figure 1. PowerMaster features

Power selection switch

Power output

terminals

1 2 3 4 5 6 7 8 9 ... 23 24

Keine Kommentare

BPC PowerMaster Bedienungshandbuch Seite 4