BPC PowerMaster Bedienungshandbuch PDF herunterladen (Seite 9)

Connecting your PowerHouse to a traditional transformer

Do not use a transformer with an output voltage greater than 20 VAC. Doing so

may damage the PowerMaster.

1. Connect the Power Adapter wire fitted with a fuse to the Power/A/B/C/D terminal on your

transformer.

2. Connect the other Power Adapter wire without a fuse to the Common/Ground/U terminal

on your transformer.

3. Insert the Power Adapter wire’s connector plug into the PowerMaster’s connector jack.

4. Set the power selector switch to 135 watts if you are using a transformer with an output of

up to 7.5 Amps or to 180 watts for transformers with outputs of up to 10 Amps. Refer to the

specifications printed on the transformer or in the instructions.

Always turn off or unplug your transformer when you are not operating your model

railroad.

Note!

Figure 6. Transformer connection

POWER

SUPPLY

180

135

TMCC Power

Adapter Cable

6-12893

Common/Ground/U

Power A/B/C/D

Caution!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Keine Kommentare

BPC PowerMaster Bedienungshandbuch Seite 9